Rollimat Tap Burnishing Device With Motor + Widia Burnishing Disc

 

 

Rollimat Tap Burnishing Device With Motor + Widia Burnishing Disc

 

For rolling the pin of the minute wheel on pendulum, pocket and wristwatches, etc.

 

 

 

Rollimat Tap Burnishing Device With Motor + Widia Burnishing Disc

 

For rolling minute wheel pivots of pendulum, pocket and wristwatches, anchor pivots of pendulum clocks with long forks, plastic pivots and all round parts such as shaft trees, anchor pins, quarter pinions, spring cores, bearing pins or wind-up shafts.

Burnishes all tenons from Ø 0.3 to 4.0 mm in a matter of seconds.

Burnishing is a process to refine the surface of round workpieces. The wheelchair

    rolls tenons in seconds,
    all cones from 0.30 to 4.00 mm,
    polished by Widia roller wheel.

Technical Specifications

• Power --> 100 watts
• Speed ​​--> 300 rpm.
• Mains connection --> 230 volts / 50 Hz
• Mains plug --> EU
• Dimensions (LxWxH) --> 220 x 100 x 240 mm
• Weight --> 4.9 kg

Scope Of Delivery

• Rollimat Tap Burnishing Device
• Wida burnishing wheel 4 mm

And that's how it's done
Measure the rough tenon, clamp it in the appropriate notch and fix the tenon thickness. Fix the workpiece with your fingers and switch on the device for one to two seconds. The spigot is finished and given an excellent polish by the WIDIA burnishing wheel.

With a bit of practice, all the going and chiming pegs of a pendulum clock can be rolled in 5 to 7 minutes.