SOLDER TUBE For Propane Gas Length 200 mm

 

 

SOLDER TUBE For Propane Gas Length 200 mm

 

Soldering Tube With Burner Head 8 mm In Diameter. The Soldering Tubes Have A Control Valve In The Gas Supply To Set The Desired Flame Size.

 

 

 

SOLDER TUBE For Propane Gas Length 200 mm

 

Soldering Tube With Burner Head 8 mm In Diameter. The Soldering Tubes Have A Control Valve In The Gas Supply To Set The Desired Flame Size.

 

Product Features

• Pipe Ø of the gas and air supply -> 9 mm
• Gas consumption -> 0.1 m³ / h
• Air consumption -> 0.4 m³ / h
• Air pressure -> 150 to 200 mm WS (water column)
• Length -> 200 mm
• Weight -> 110 g

Note

Important: Use a pressure regulator. With more than 500 mm W.S. a high pressure hose must be used
Our soldering tubes are set up and tested according to DIN 3255 for the gas pressures specified in the product insert. The installation should be based on the DVGW worktop G 621 laboratory equipment. Low pressure regulators should be used to regulate the pressure when using propane gas. The soldering tubes must not be operated with oxygen.

Necessary Extras:

• Pressure regulator
• Hose rupture protection
• Hose clamps
• Hose for compressed air
• Hose for fuel gas